自动化运维、大数据、Docker

Elk实时日志分析平台5.0版本源码安装配置

最近有朋友老说用RPM安装ELK教程不适用,不通用;很多生产环境不联网,操作系统版本也不同;叫我弄个源码安装的教程。所以就整理一个ELK5.0版本源码安装过程,水平有限,凑合着看!!最后附上安装包

一、配置Java环境变量

# mkdir /usr/local/java/ –p  
# cd /usr/local/java/  
# tar zxvf /data/elk5.0/jdk-8u111-linux-x64.tar.gz  

# cat >>/etc/profile<<EOF  

export JAVA_HOME=/usr/local/java/jdk1.8.0_111  
export PATH=$PATH:$JAVA_HOME/bin  
exportCLASSPATH=.:$JAVA_HOME/lib/dt.jar:$JAVA_HOME/lib/tools.jar  
EOF  

# source /etc/profile  
# java -version  
java version "1.8.0_111"  
Java(TM) SE Runtime Environment (build 1.8.0_111-b14)  
Java HotSpot(TM) 64-Bit Server VM (build 25.111-b14, mixedmode)

二、安装elasticsearch

 

# mkdir  /data/PRG/-p  
# cd /data/PRG/  
# tar zxvf /data/elk5.0/elasticsearch-5.0.0.tar.gz  
# mv elasticsearch-5.0.0 elasticsearch  
# useradd elasticsearch -s /sbin/nologin  
# chown elasticsearch. elasticsearch /data/PRG/elasticsearch/

添加启动脚本

vi /etc/init.d/elasticsearch

#!/bin/sh  
#  
# elasticsearch <summary>  
#  
# chkconfig:   2345 80 20  
# description: Starts and stops a single elasticsearch instance on this system  
#  


### BEGIN INIT INFO  
# Provides: Elasticsearch  
# Required-Start: $network $named  
# Required-Stop: $network $named  
# Default-Start: 2 3 4 5  
# Default-Stop: 0 1 6  
# Short-Description: This service manages the elasticsearch daemon  
# Description: Elasticsearch is a very scalable, schema-free and high-performance search solution supporting multi-tenancy and near realtime search.  
### END INIT INFO  


#  
# init.d / servicectl compatibility (openSUSE)  
#  
if [ -f /etc/rc.status ]; then  
    . /etc/rc.status  
    rc_reset  
fi  


#  
# Source function library.  
#  
if [ -f /etc/rc.d/init.d/functions ]; then  
    . /etc/rc.d/init.d/functions  
fi  






# Sets the default values for elasticsearch variables used in this script  
export JAVA_HOME=/usr/local/java/jdk1.8.0_111  
ES_USER="elasticsearch"  
ES_GROUP="elasticsearch"  
name=elasticsearch  
ES_HOME="/data/PRG/elasticsearch"  
MAX_OPEN_FILES=65536  
MAX_MAP_COUNT=262144  
LOG_DIR="$ES_HOME/log/"  
DATA_DIR="$ES_HOME/lib/"  
CONF_DIR="$ES_HOME/config"  
mkdir -p $LOG_DIR  
chown -R elasticsearch.elasticsearch $ES_HOME  


PID_DIR="$ES_HOME/log"  


# Source the default env file  
ES_ENV_FILE="/etc/sysconfig/elasticsearch"  
if [ -f "$ES_ENV_FILE" ]; then  
    . "$ES_ENV_FILE"  
fi  


# CONF_FILE setting was removed  
if [ ! -z "$CONF_FILE" ]; then  
    echo "CONF_FILE setting is no longer supported. elasticsearch.yml must be placed in the config directory and cannot be renamed."  
    exit 1  
fi  


exec="$ES_HOME/bin/elasticsearch"  
prog="elasticsearch"  
pidfile="$PID_DIR/${prog}.pid"  


export ES_HEAP_SIZE  
export ES_HEAP_NEWSIZE  
export ES_DIRECT_SIZE  
export ES_JAVA_OPTS  
export ES_GC_LOG_FILE  
export ES_STARTUP_SLEEP_TIME  
export JAVA_HOME  
export ES_INCLUDE  
ulimit -n $MAX_OPEN_FILES  
lockfile=$ES_HOME/log/$prog  


# backwards compatibility for old config sysconfig files, pre 0.90.1  
if [ -n $USER ] && [ -z $ES_USER ] ; then  
   ES_USER=$USER  
fi  


checkJava() {  
    if [ -x "$JAVA_HOME/bin/java" ]; then  
        JAVA="$JAVA_HOME/bin/java"  
    else  
        JAVA=`which java`  
    fi  


    if [ ! -x "$JAVA" ]; then  
        echo "Could not find any executable java binary. Please install java in your PATH or set JAVA_HOME"  
        exit 1  
    fi  
}  


start() {  
    checkJava  
    [ -x $exec ] || exit 5  
    if [ -n "$MAX_LOCKED_MEMORY" -a -z "$ES_HEAP_SIZE" ]; then  
        echo "MAX_LOCKED_MEMORY is set - ES_HEAP_SIZE must also be set"  
        return 7  
    fi  
    if [ -n "$MAX_OPEN_FILES" ]; then  
        ulimit -n $MAX_OPEN_FILES  
    fi  
    if [ -n "$MAX_LOCKED_MEMORY" ]; then  
        ulimit -l $MAX_LOCKED_MEMORY  
    fi  
    if [ -n "$MAX_MAP_COUNT" -a -f /proc/sys/vm/max_map_count ]; then  
        sysctl -q -w vm.max_map_count=$MAX_MAP_COUNT  
    fi  
    export ES_GC_LOG_FILE  


    # Ensure that the PID_DIR exists (it is cleaned at OS startup time)  
    if [ -n "$PID_DIR" ] && [ ! -e "$PID_DIR" ]; then  
        mkdir -p "$PID_DIR" && chown "$ES_USER":"$ES_GROUP" "$PID_DIR"  
    fi  
    if [ -n "$pidfile" ] && [ ! -e "$pidfile" ]; then  
        touch "$pidfile" && chown "$ES_USER":"$ES_GROUP" "$pidfile"  
    fi  


    cd $ES_HOME  
    echo -n $"Starting $prog: "  
    # if not running, start it up here, usually something like "daemon $exec"  
    daemon --user $ES_USER  --pidfile $pidfile $exec -p $pidfile -d  


    #daemon --user $ES_USER --pidfile $pidfile $exec -p $pidfile -d -Des.default.path.home=$ES_HOME -Des.default.path.logs=$LOG_DIR -Des.default.path.data=$DATA_DIR -Des.default.path.conf=$CONF_DIR  
    retval=$?  
    echo  
    [ $retval -eq 0 ] && touch $lockfile  
    return $retval  
}  


stop() {  
    echo -n $"Stopping $prog: "  
    # stop it here, often "killproc $prog"  
    killproc -p $pidfile -d 86400 $prog  
    retval=$?  
    echo  
    [ $retval -eq 0 ] && rm -f $lockfile  
    return $retval  
}  


restart() {  
    stop  
    start  
}  


reload() {  
    restart  
}  


force_reload() {  
    restart  
}  


rh_status() {  
    # run checks to determine if the service is running or use generic status  
    status -p $pidfile $prog  
}  


rh_status_q() {  
    rh_status >/dev/null 2>&1  
}  




case "$1" in  
    start)  
        rh_status_q && exit 0  
        $1  
        ;;  
    stop)  
        rh_status_q || exit 0  
        $1  
        ;;  
    restart)  
        $1  
        ;;  
    reload)  
        rh_status_q || exit 7  
        $1  
        ;;  
    force-reload)  
        force_reload  
        ;;  
    status)  
        rh_status  
        ;;  
    condrestart|try-restart)  
        rh_status_q || exit 0  
        restart  
        ;;  
    *)  
        echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload}"  
        exit 2  
esac  
exit $?

 

# chmod +x /etc/init.d/elasticsearch  

# /etc/init.d/elasticsearch start  

# /etc/init.d/elasticsearch status  
elasticsearch (pid 20895) is running...  
# netstat -ntlp |grep 9[2-3]00  
tcp        0     0 :::9300                    :::*                        LISTEN      20895/java           
tcp        0      0 :::9200                     :::*                        LISTEN      20895/java

三、配置elasticsearch

内存低于2G,需要修改jvm配置

 

# vim /data/PRG/elasticsearch/config/jvm.options  
-Xms512m  
-Xmx512m  

# cat /data/PRG/elasticsearch/config/elasticsearch.yml|grep -v '#'  
network.host: 0.0.0.0           ###开启监听地址,  
action.auto_create_index:.security,.monitoring*,.watches,.triggered_watches,.watcher-history*  
####以下模块视情况是否开启  
xpack.security.enabled: true          ####开启用户认证  
xpack.monitoring.enabled: true  
xpack.graph.enabled: true  
xpack.watcher.enabled: true  
xpack.security.authc.realms:     ####用户认证模式,ldap、file、pki、ActiveDirectory等  
    file1:  
      type: file  
      order: 0

四、安装logstash

# cd /data/PRG/  
# tar zxvf /data/elk5.0/logstash-5.0.0.tar.gz  
# mv logstash-5.0.0 logstash  
# useradd logstash -s /sbin/nologin  
# chown logstash. logstash /data/PRG/logstash

添加启动脚本

vim /etc/init.d/logstash

#!/bin/sh  
# Init script for logstash  
# Maintained by Elasticsearch  
# Generated by pleaserun.  
# Implemented based on LSB Core 3.1:  
#   * Sections: 20.2, 20.3  
#  
### BEGIN INIT INFO  
# Provides:          logstash  
# Required-Start:    $remote_fs $syslog  
# Required-Stop:     $remote_fs $syslog  
# Default-Start:     2 3 4 5  
# Default-Stop:      0 1 6  
# Short-Description:  
# Description:        Starts Logstash as a daemon.  
### END INIT INFO  

PATH=/sbin:/usr/sbin:/bin:/usr/bin:/data/PRG/logstash/bin  
export PATH  

if [ `id -u` -ne 0 ]; then  
   echo "You need root privileges to run this script"  
   exit 1  
fi  

name=logstash  

LS_USER=logstash  
LS_GROUP=logstash  
LS_HOME=/data/PRG/logstash  
LS_HEAP_SIZE="1g"  
LS_LOG_DIR=/data/PRG/logstash/logs  
LS_LOG_FILE="${LS_LOG_DIR}/$name.log"  
pidfile="${LS_LOG_DIR}/$name.pid"  
LS_CONF_DIR=/data/PRG/logstash/conf.d  
LS_OPEN_FILES=16384  
LS_NICE=19  
KILL_ON_STOP_TIMEOUT=${KILL_ON_STOP_TIMEOUT-0} #default value is zero to this variable but could be updated by user request  
LS_OPTS=""  


[ -r /etc/default/$name ] && . /etc/default/$name  
[ -r /etc/sysconfig/$name ] && . /etc/sysconfig/$name  

program=$LS_HOME/bin/logstash  
args=" -f ${LS_CONF_DIR} -l ${LS_LOG_FILE} ${LS_OPTS}"  

quiet() {  
  "$@" > /dev/null 2>&1  
  return $?  
}  

start() {  

  LS_JAVA_OPTS="${LS_JAVA_OPTS} -Djava.io.tmpdir=${LS_HOME}"  
  HOME=${LS_HOME}  
  export PATH HOME LS_HEAP_SIZE LS_JAVA_OPTS LS_USE_GC_LOGGING LS_GC_LOG_FILE  

  # chown doesn't grab the suplimental groups when setting the user:group - so we have to do it for it.  
  # Boy, I hope we're root here.  
  SGROUPS=$(id -Gn "$LS_USER" | tr " " "," | sed 's/,$//'; echo '')  

  if [ ! -z $SGROUPS ]  
  then  
        EXTRA_GROUPS="--groups $SGROUPS"  
  fi  

  # set ulimit as (root, presumably) first, before we drop privileges  
  ulimit -n ${LS_OPEN_FILES}  

  # Run the program!  
  nice -n ${LS_NICE} chroot --userspec $LS_USER:$LS_GROUP $EXTRA_GROUPS / sh -c "  
    cd $LS_HOME  
    ulimit -n ${LS_OPEN_FILES}  
    $program $args > ${LS_LOG_DIR}/$name.stdout" 2> "${LS_LOG_DIR}/$name.err" &  

  # Generate the pidfile from here. If we instead made the forked process  
  # generate it there will be a race condition between the pidfile writing  
  # and a process possibly asking for status.  
  echo $! > $pidfile  

  echo "$name started."  
  return 0  
}  

stop() {  
  # Try a few times to kill TERM the program  
  if status ; then  
    pid=`cat "$pidfile"`  
    echo "Killing $name (pid $pid) with SIGTERM"  
    ps -ef |grep $pid |grep -v 'grep' |awk '{print $2}' | xargs kill -9  
    # Wait for it to exit.  
    for i in 1 2 3 4 5 6 7 8 9 ; do  
      echo "Waiting $name (pid $pid) to die..."  
      status || break  
      sleep 1  
    done  
    if status ; then  
      if [ $KILL_ON_STOP_TIMEOUT -eq 1 ] ; then  
        echo "Timeout reached. Killing $name (pid $pid) with SIGKILL. This may result in data loss."  
        kill -KILL $pid  
        echo "$name killed with SIGKILL."  
      else  
        echo "$name stop failed; still running."  
        return 1 # stop timed out and not forced  
      fi  
    else  
      echo "$name stopped."  
    fi  
  fi  
}  

status() {  
  if [ -f "$pidfile" ] ; then  
    pid=`cat "$pidfile"`  
    if kill -0 $pid > /dev/null 2> /dev/null ; then  
      # process by this pid is running.  
      # It may not be our pid, but that's what you get with just pidfiles.  
      # TODO(sissel): Check if this process seems to be the same as the one we  
      # expect. It'd be nice to use flock here, but flock uses fork, not exec,  
      # so it makes it quite awkward to use in this case.  
      return 0  
    else  
      return 2 # program is dead but pid file exists  
    fi  
  else  
    return 3 # program is not running  
  fi  
}  

configtest() {  
  # Check if a config file exists  
  if [ ! "$(ls -A ${LS_CONF_DIR}/* 2> /dev/null)" ]; then  
    echo "There aren't any configuration files in ${LS_CONF_DIR}"  
    return 1  
  fi  

  HOME=${LS_HOME}  
  export PATH HOME  

  test_args="-t -f ${LS_CONF_DIR} ${LS_OPTS} "  
  $program ${test_args}  
  [ $? -eq 0 ] && return 0  
  # Program not configured  
  return 6  
}  

case "$1" in  
  start)  
    status  
    code=$?  
    if [ $code -eq 0 ]; then  
      echo "$name is already running"  
    else  
      start  
      code=$?  
    fi  
    exit $code  
    ;;  
  stop) stop ;;  
  force-stop) force_stop ;;  
  status)  
    status  
    code=$?  
    if [ $code -eq 0 ] ; then  
      echo "$name is running"  
    else  
      echo "$name is not running"  
    fi  
    exit $code  
    ;;  
  reload) reload ;;  
  restart)  
    stop && start  
    ;;  
  check)  
    configtest  
    exit $?  
    ;;  
  *)  
    echo "Usage: $SCRIPTNAME {start|stop|status|restart|check}" >&2  
    exit 3  
  ;;  
esac  

exit $?

 

# chmod +x /etc/init.d/logstash  
# /etc/init.d/logstash start  
# /etc/init.d/logstash status    
logstash is running  

# netstat -ntlp|grep 9600  
tcp        0      0 :::9600                     :::*                        LISTEN      10141/java

五、配置logstash

# cat /data/PRG/logstash/config/logstash.yml  |grep -v ‘#’

http.host: “0.0.0.0”       ###开启监听地址

ngin日志收集

 

# cat /data/PRG/logstash/conf.d/filter.conf  
input {  
  beats {  
    port => 10200  
  }  
}  

filter {  
    grok {       
            match=> {  
               message => "%{IPORHOST:remote_addr} , 
, %{IPORHOST:http_host} , \"%{WORD:http_verb}(?:%{PATH:baseurl}\?%{NOTSPACE:params}|%{DATA:raw_http_request})\" , %{NUMBER:http_status_code}, %{NUMBER:bytes_read} , %{QS:referrer} , %{QS:agent} ,\"%{IPORHOST:client_ip}, %{IPORHOST:proxy_server}\" , - , - , - ,%{IPORHOST:server_ip} , %{BASE10NUM:request_duration}"  

            }  

            match=> {  
               message => "%{IPORHOST:remote_addr} , 
, %{IPORHOST:http_host} , \"%{WORD:http_verb}(?:%{PATH:baseurl}\?%{NOTSPACE:params}|%{DATA:raw_http_request})\" , %{NUMBER:http_status_code}, %{NUMBER:bytes_read} , %{QUOTEDSTRING:referrer} , %{QS:agent} ,\"%{IPORHOST:client_ip}, %{IPORHOST:proxy_server}\" ,%{IPORHOST}:%{INT} , %{INT} , %{BASE10NUM} , %{IPORHOST} ,%{BASE10NUM:request_duration}"  

            }  
    }  

}  
output {  
 elasticsearch {  
   hosts =>["192.168.62.200:9200"]  
   index =>"operation-%{+YYYY.MM.dd}"  
   document_type=> "nginx2"  
   user => 'admin'              #### elasticsearch的用户名,用X-PACK插件创建  
   password =>'kbsonlong'       #### elasticsearch的用户名  
  }  
 stdout { codec =>rubydebug }  
}

六、安装kibana

# cd /data/PRG/

# tar zxvf /data/elk5.0/kibana-5.0.0-linux-x86_64.tar.gz

# mv kibana-5.0.0-linux-x86_64 kibana

# useradd kibana –s /sbin/nologin

# chown kibana. kibana /data/PRG/kibana

添加启动脚本

# vim /etc/init.d/kibana

#!/bin/sh  
# Init script for kibana  
# Maintained by   
# Generated by pleaserun.  
# Implemented based on LSB Core 3.1:  
#   * Sections: 20.2, 20.3  
#  
### BEGIN INIT INFO  
# Provides:          kibana  
# Required-Start:    $remote_fs $syslog  
# Required-Stop:     $remote_fs $syslog  
# Default-Start:     2 3 4 5  
# Default-Stop:      0 1 6  
# Short-Description:   
# Description:       Kibana  
### END INIT INFO  

PATH=/sbin:/usr/sbin:/bin:/usr/bin  
export PATH  

KIBANA_HOME=/data/PRG/kibana  
name=kibana  
program=$KIBANA_HOME/bin/kibana  
args=''  
pidfile="$KIBANA_HOME/logs/$name.pid"  
LOG_HOME="$KIBANA_HOME/logs"  

[ -r /etc/default/$name ] && . /etc/default/$name  
[ -r /etc/sysconfig/$name ] && . /etc/sysconfig/$name  

[ -z "$nice" ] && nice=0  

trace() {  
  logger -t "/etc/init.d/kibana" "$@"  
}  

emit() {  
  trace "$@"  
  echo "$@"  
}  

start() {  

  # Ensure the log directory is setup correctly.  
  [ ! -d "$LOG_HOME" ] && mkdir "$LOG_HOME"  
  chmod 755 "$LOG_HOME"  


  # Setup any environmental stuff beforehand  


  # Run the program!  

  #chroot --userspec "$user":"$group" "$chroot" sh -c "  

  $program $args >> $LOG_HOME/kibana.stdout 2>> $LOG_HOME/kibana.stderr &  

  # Generate the pidfile from here. If we instead made the forked process  
  # generate it there will be a race condition between the pidfile writing  
  # and a process possibly asking for status.  
  echo $! > $pidfile  

  emit "$name started"  
  return 0  
}  

stop() {  
  # Try a few times to kill TERM the program  
  if status ; then  
    pid=$(cat "$pidfile")  
    echo "Killing $name (pid $pid) with SIGTERM"  
    ps -ef |grep $pid |grep -v 'grep' |awk '{print $2}' | xargs kill -9  
    # Wait for it to exit.  
    for i in 1 2 3 4 5 ; do  
      trace "Waiting $name (pid $pid) to die..."  
      status || break  
      sleep 1  
    done  
    if status ; then  
      if [ "$KILL_ON_STOP_TIMEOUT" -eq 1 ] ; then  
        trace "Timeout reached. Killing $name (pid $pid) with SIGKILL.  This may result in data loss."  
        kill -KILL $pid  
        emit "$name killed with SIGKILL."  
      else  
        emit "$name stop failed; still running."  
      fi  
    else  
      emit "$name stopped."  
    fi  
  fi  
}  

status() {  
  if [ -f "$pidfile" ] ; then  
    pid=$(cat "$pidfile")  
    if ps -p $pid > /dev/null 2> /dev/null ; then  
      # process by this pid is running.  
      # It may not be our pid, but that's what you get with just pidfiles.  
      # TODO(sissel): Check if this process seems to be the same as the one we  
      # expect. It'd be nice to use flock here, but flock uses fork, not exec,  
      # so it makes it quite awkward to use in this case.  
      return 0  
    else  
      return 2 # program is dead but pid file exists  
    fi  
  else  
    return 3 # program is not running  
  fi  
}  




case "$1" in  
  force-start|start|stop|status|restart)  
    trace "Attempting '$1' on kibana"  
    ;;  
esac  

case "$1" in  
  force-start)  
    PRESTART=no  
    exec "$0" start  
    ;;  
  start)  
    status  
    code=$?  
    if [ $code -eq 0 ]; then  
      emit "$name is already running"  
      exit $code  
    else  
      start  
      exit $?  
    fi  
    ;;  
  stop) stop ;;  
  status)  
    status  
    code=$?  
    if [ $code -eq 0 ] ; then  
      emit "$name is running"  
    else  
      emit "$name is not running"  
    fi  
    exit $code  
    ;;  
  restart)  

    stop && start  
    ;;  
  *)  
    echo "Usage: $SCRIPTNAME {start|force-start|stop|force-start|force-stop|status|restart}" >&2  
    exit 3  
  ;;  
esac  

exit $?

 

  1. # chmod +x /etc/init.d/kibana
  2. # /etc/init.d/kibana start
  3. # /etc/init.d/kibana status
  4. # netstat -ntlp |grep 5601
  5. tcp        0      0 0.0.0.0:5601                0.0.0.0:*                   LISTEN      13052/node

七、配置kibana

 

  1. # cat /data/PRG/kibana/config/kibana.yml |grep -v ‘#’
  2. server.host: “0.0.0.0”
  3. ####以下模块视情况是否开启
  4. xpack.security.enabled: true
  5. xpack.monitoring.enabled: true
  6. xpack.graph.enabled: true
  7. xpack.reporting.enabled: true

八、x-pack插件安装

# /data/PRG/kibana/bin/kibana-plugin install file:///root/x-pack-5.0.0.zip

# /data/PRG/elasticsearch/bin/elasticsearch-plugin install file:///root/x-pack-5.0.0.zip

离线安装x-pack要修改用户脚本,默认创建用户配置文件在/etc/elasticsearch/x-pack目录

# vim /data/PRG/elasticsearch/bin/x-pack/users

否则在创建用户的时候提示/etc/elasticsearch/x-pack/users…tmp不存在

# mkdir /etc/elasticsearch/x-pack/

# chown elasticsearch. elasticsearch /etc/elasticsearch/x-pack/-R

九、           x-pack管理用户

1、          添加用户

 

  1. # cd /data/PRG/elasticsearch
  2. # bin/x-pack/users useradd admin -p kbsonlong -rsuperuser

2、          查看用户

 

  1. # /data/PRG/elasticsearch/bin/x-pack/users list
  2. admin          :superuser
  3. test           : –                ###创建用户时没有添加-r参数,所以没有用户角色

3、          测试用户登录

 

  1. # curl http://localhost:9200/_xpack/ –useradmin:kbsonlong
  2. {“build”:{“hash”:”7763f8e”,”date”:”2016-10-26T04:51:59.202Z”},”license”:{“uid”:”06a82587-66ac-4d4a-90c4-857d9ca7f3bc”,”type”:”trial”,”mode”:”trial”,”status”:”active”,”expiry_date_in_millis”:1483753731066},”features”:{“graph”:{“description”:”GraphData Exploration for the ElasticStack”,”available”:true,”enabled”:true},”monitoring”:{“description”:”Monitoringfor the ElasticStack”,”available”:true,”enabled”:true},”security”:{“description”:”Securityfor the ElasticStack”,”available”:true,”enabled”:true},”watcher”:{“description”:”Alerting,Notification and Automation for the ElasticStack”,”available”:true,”enabled”:true}},”tagline”:”Youknow, for X”}

4、          删除用户

 

# /data/PRG/elasticsearch/bin/x-pack/users userdel test

# /data/PRG/elasticsearch/bin/x-pack/users list

admin          :superuser

十、安装filebeat

 

# cd /data/PRG

# tar zxvf / data/elk5.0/filebeat-5.0.0-linux-x86_64.tar.gz

# mv filebeat-5.0.0-linux-x86_64  filebeat

配置启动脚本

# vim /etc/init.d/filebeat

#!/bin/bash

#

# filebeat          filebeat shipper

#

# chkconfig: 2345 98 02

#

### BEGIN INIT INFO

# Provides:          filebeat

# Required-Start:    $local_fs $network $syslog

# Required-Stop:     $local_fs $network $syslog

# Default-Start:     2 3 4 5

# Default-Stop:      0 1 6

# Short-Description: Sends log files to Logstash or directly to Elasticsearch.

# Description:       filebeat is a shipper part of the Elastic Beats

#                    family. Please see: https://www.elastic.co/products/beats

### END INIT INFO

PATH=/usr/bin:/sbin:/bin:/usr/sbin

export PATH

[ -f /etc/sysconfig/filebeat ] && . /etc/sysconfig/filebeat

pidfile=${PIDFILE-/data/PRG/filebeat/filebeat.pid}

agent=${PB_AGENT-/data/PRG/filebeat/filebeat}

args=”-c /data/PRG/filebeat/filebeat.yml”

test_args=”-e -configtest”

wrapper=”filebeat-god”

wrapperopts=”-r / -n -p $pidfile”

RETVAL=0

# Source function library.

. /etc/rc.d/init.d/functions

# Determine if we can use the -p option to daemon, killproc, and status.

# RHEL < 5 can’t.

if status | grep -q — ‘-p’ 2>/dev/null; then

daemonopts=”–pidfile $pidfile”

pidopts=”-p $pidfile”

fi

test() {

$agent $args $test_args

}

start() {

echo -n $”Starting filebeat: ”

test

if [ $? -ne 0 ]; then

echo

exit 1

fi

daemon $daemonopts $wrapper $wrapperopts — $agent $args

RETVAL=$?

echo

return $RETVAL

}

stop() {

echo -n $”Stopping filebeat: ”

killproc $pidopts $wrapper

RETVAL=$?

echo

[ $RETVAL = 0 ] && rm -f ${pidfile}

}

restart() {

test

if [ $? -ne 0 ]; then

return 1

fi

stop

start

}

rh_status() {

status $pidopts $wrapper

RETVAL=$?

return $RETVAL

}

rh_status_q() {

rh_status >/dev/null 2>&1

}

case “$1″ in

start)

start

;;

stop)

stop

;;

restart)

restart

;;

condrestart|try-restart)

rh_status_q || exit 0

restart

;;

status)

rh_status

;;

*)

echo $”Usage: $0 {start|stop|status|restart|condrestart}”

exit 1

esac

exit $RETVAL

配置filebeat

 

# cat filebeat/filebeat.yml |grep -v ‘#’

filebeat.prospectors:

– input_type: log

paths:

-/tmp/nginx.log

output.logstash:

enabled: true

hosts: [“localhost:10200”]

启动filebeat

 

# /etc/init.d/filebeat5 start

Starting filebeat: 2016/12/0807:18:37.177631 beat.go:264: INFO Home path: [/data/PRG/filebeat] Config path:[/data/PRG/filebeat] Data path: [/data/PRG/filebeat/data] Logs path:[/data/PRG/filebeat/logs]

2016/12/08 07:18:37.177681 beat.go:174:INFO Setup Beat: filebeat; Version: 5.0.0

2016/12/08 07:18:37.177760 logstash.go:90:INFO Max Retries set to: 3

2016/12/08 07:18:37.177828 outputs.go:106:INFO Activated logstash as output plugin.

2016/12/08 07:18:37.177912 publish.go:291:INFO Publisher name: operation

2016/12/08 07:18:37.178158 async.go:63:INFO Flush Interval set to: 1s

2016/12/08 07:18:37.178170 async.go:64:INFO Max Bulk Size set to: 2048

Config OK

[  OK  ]

# /etc/init.d/filebeat5 status

filebeat-god (pid  7365) is running…

# ps -ef |grep filebeat

root     7405     1  0 15:18 pts/1    00:00:00 filebeat-god -r / -n -p/data/PRG/filebeat/filebeat.pid — /data/PRG/filebeat/filebeat -c/data/PRG/filebeat/filebeat.yml

root     7406  7405  0 15:18 pts/1    00:00:00 /data/PRG/filebeat/filebeat -c/data/PRG/filebeat/filebeat.yml

附上安装源码包,包括x-pack、beat等

百度云盘http://pan.baidu.com/s/1skT4zCx

赞(0) 打赏
蜷缩的蜗牛 , 版权所有丨如未注明 , 均为原创丨 转载请注明蜷缩的蜗牛 » Elk实时日志分析平台5.0版本源码安装配置
分享到: 更多 (0)

评论 1

评论前必须登录!

 

  1. #-9

    启动错误参考https://blog.csdn.net/qq942477618/article/details/53414983

觉得文章有用就打赏一下文章作者

支付宝扫一扫打赏

微信扫一扫打赏